How to Install Window Tint to Your Vehicle Like A Pro

How to Install Window Tint to Your Vehicle Like A Pro

Hiring a professional to install window tint to your car’s windows can be quite costly. Some car owners still prefer to do the job themselves.  If you’re budget-savvy, or even a DIY enthusiast, you can install window tint to your vehicle like a pro by following the steps listed below.

What You’ll Need

First, you must gather the following materials:

  • Window tint film
  • Window tint film application solution
  • Razor knife
  • Cleaning cloth
  • Application squeegee
  • Scraper blade

Look for a dust-free area to work in and stay away from excessive heat or cold. Most importantly, check your state laws regarding window tint.

This DIY procedure can also be done to yacht windows in Orlando FL.

Preparation

After gathering the materials, apply the application solution to the interior window. Avoid over-spraying onto the door trims. To remove any debris, grime and dust, and run the scraper blade across the window. Use the squeegee to remove any leftover debris.

Application

Place the application solution on the outside of your car’s window and carefully roll the tint film over it. If you want maximum protection from the sun, you can use solar film near Orlando FL. Make sure that the protective-film layer is facing upward direction.

Use a clear tape to fix the film in the window’s corner. After that, peel the protective liner from the film. As you peel, don’t forget to spray the application solution to the film’s adhesive surface. Remove the film from outside the window, and then put it on the inside.

As you move the tint at the top of the window, leave a 1/8-inch gap from the top. Use the squeegee to get rid of any air or water.

Your squeegee should be wrapped in a lint-free cloth. Then run the squeegee across the whole window. Wipe down paint and door trims using the cloth. You can use a heat gun to warm the area where bubbles and trapped air are still present.

 Repeat the process to all windows until the tinting job is complete.

DIY window tinting projects are not limited to cars. There are also DIY procedures for commercial glass tinting near Orlando FL available online.

I f you’re in Wellington area, you should look for ideas online by typing the phrase “window tinting Wellington in Orlando FL”. If you’re currently residing in the city of Tampa, you could use the phrase “window tinting Tampa around Orlando FL.

In terms of cost, a DIY car window tint is a worthwhile project. You would be able to save plenty of money without compromising the quality of window tint installed on your car.