Mobile Window Tinting Steps in Lewiston, Maine

Mobile Window Tinting Steps in Lewiston, Maine

In this day and age, it is very common to see mobile window tinting in Lewiston, Maine It became popular since it can add up to the style and appearance of a vehicle.

Moreover, it provides additional privacy for the driver and passengers, and they serve as a protection against the harmful UV rays of the sunlight. In tinting your car windows in window tinting near me in Lewiston, Maine, you can choose to hire a professional to do the task for you or you can buy a DIY (Do-It-Yourself) Window Tinting Kit.

The good thing about hiring an expert in mobile auto window tinting near me in Lewiston, Maine is that you are assured that the job will be flawlessly done in a timely manner. However, the cost will be a little bit more expensive compared to doing the work yourself. Applying car tint requires accuracy and skills, and it could be a difficult task for starters.  The following steps can make the whole process easier.

Step 1: Choose a specific tint that you want

Tints have different shades and effects, so it is up to you to decide what particular style best fits your car. Window tinting near me prices in Lewiston, Maine may also vary, so considering it will also be crucial.

Step 2: Clean the windows

Clean the windows thoroughly, using a window cleaning solution and a squeegee. This stage is very important because it can affect the whole process if not done properly. The dirt can cause unwanted bubbles during the procedure.

Step 3: Measure the tint film

Remember, in determining the size of the film you must have at least more than an inch as an extra to make sure that the window will be covered suitably. Mobile auto tinting near me in Lewiston, Maine can also use cardboard as a template for each window so you can get the exact shape and size.

Step 4: Cut the film accurately

Make sure that the film used by mobile car tint service in Lewiston, Maine will fit perfectly. You should ensure it is cut properly through the corners to avoid gaps between the rubber and the film.

Step 5: Applying the film

Once you are satisfied with the size and shape of the film, you are now ready to put it on. I suggest you use a spray bottle to spread over the application solution. This stage is very crucial; one wrong move can cause you to repeat the whole method.

  • Carefully place the film into the glass, as soon as you are contented with the position; use a squeegee to apply pressure on the film until it tightly grabs the glass.
  • Make sure there are no bubbles inside, use a rug to polish the whole film.

Enjoy the fresh new look of your automobile.